CUPHEADS
Cuphead pins come with or without insulating washers. The washers provide protection between the fastener and electrically conductive (foil faced) material. The insulating washers are available in a paper or tape style. The paper washers are oversized and are preferred for a "quilted" appearance. The tape washers are the same size as the cupped dish and are used as a less expensive alternative when the quilted appearance is not desired. Select "none" if the insulating washer is not required.
Sort By:
Filters:
Pin Diameter
Length
Material
Insulator
Page {pageNumber} of {pagesNumber}
- CH1112-0375
- CUPHEAD 12GA X 3/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3/83/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-0500
- CUPHEAD 12GA X 1/2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1/21/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-0500-T
- CUPHEAD 12GA X 1/2" W/TAPE WASHER
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1/21/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-0625
- CUPHEAD 12GA X 5/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 5/85/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-0625-T
- CUPHEAD 12GA X 5/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 5/85/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-0750
- CUPHEAD 12GA X 3/4" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3/43/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-0750-T
- CUPHEAD 12GA X 3/4" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3/43/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-0875
- CUPHEAD 12GA X 7/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 7/87/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-0875-T
- CUPHEAD 12GA X 7/8" W/TAPE WASHER
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 7/87/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1000
- CUPHEAD 12GA X 1" W/PAPER WASHER
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 11 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-1000-T
- CUPHEAD 12GA X 1" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 11 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1125
- CUPHEAD 12GA X 1-1/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/81 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-1125-T
- CUPHEAD 12GA X 1-1/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/81 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1250-T
- CUPHEAD 12GA X 1-1/4" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/41 1/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1375
- CUPHEAD 12GA X 1-3/8" W/ PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 3/81 3/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-1375-T
- CUPHEAD 12GA X 1-3/8" W/TAPE WASHER
- D
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 3/81 3/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1500
- CUPHEAD 12GA X 1-1/2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/21 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-1500-1
- CUPHEAD 12GA X 1-1/2" W/PAPER WASH-ALUM
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/21 1/2 |
| Material: | ALUMINUMALUMINUM |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-1500-T
- CUPHEAD 12GA X 1-1/2" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/21 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1625
- CUPHEAD 12GA X 1-5/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 5/81 5/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-1625-T
- CUPHEAD 12GA X1-5/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 5/81 5/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1750-T
- CUPHEAD 12GA X 1-3/4" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 3/41 3/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-1875
- CUPHEAD 12GA X 1-7/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 7/81 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-1875-T
- CUPHEAD 12GA X 1-7/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 7/81 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-2000
- CUPHEAD 12GA X 2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 22 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-2000-1
- CUPHEAD 12GA X 2" W/PAPER WASHER-ALUM
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 22 |
| Material: | ALUMINUMALUMINUM |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-2000-T
- CUPHEAD 12GA X 2" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 22 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-2125
- CUPHEAD 12GA X 2-1/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/82 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-2125-T
- CUPHEAD 12GA X 2-1/8" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/82 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-2250
- CUPHEAD 12GA X 2-1/4" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/42 1/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-2250-T
- CUPHEAD 12GA X 2-1/4" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/42 1/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-2500
- CUPHEAD 12GA X 2-1/2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/22 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-2500-T
- CUPHEAD 12GA X 2-1/2" W/TAPE WASHER
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/22 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-2625
- CUPHEAD 12GA X 2-5/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 5/82 5/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-2625-T
- CUPHEAD 12GA X 2-5/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 5/82 5/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-2875
- CUPHEAD 12GA X 2-7/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 7/82 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-2875-T
- CUPHEAD 12GA X 2-7/8" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 7/82 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-3000
- CUPHEAD 12GA X 3" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 33 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-3000-T
- CUPHEAD 12GA X 3" W/TAPE WASHER
- D
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 33 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-3125
- CUPHEAD 12GA X 3-1/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 1/83 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-3125-T
- CUPHEAD 12GA X 3-1/8" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 1/83 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-3250-T
- CUPHEAD 12GA X 3-1/4" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 1/43 1/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-3500
- CUPHEAD 12GA X 3-1/2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 1/23 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-3500-T
- CUPHEAD 12GA X 3-1/2" W/TAPE WASHER
- D
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 1/23 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-3875-T
- CUPHEAD 12GA X 3-7/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 7/83 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-4000
- CUPHEAD 12GA X 4" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 44 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-4000-T
- CUPHEAD 12GA X 4" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 44 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-4500
- CUPHEAD 12GA X 4-1/2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 4 1/24 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-4500-T
- CUPHEAD 12GA X 4-1/2" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 4 1/24 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-5000
- CUPHEAD 12GA X 5" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 55 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-5000-T
- CUPHEAD 12GA X 5" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 55 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-5500
- CUPHEAD 12GA X 5-1/2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 5 1/25 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-6000
- CUPHEAD 12GA X 6" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 66 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-6000-T
- CUPHEAD 12GA X 6" W/TAPE WASHER
- D
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 66 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH1112-6500
- CUPHEAD 12GA X 6-1/2" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 6 1/26 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-7000
- CUPHEAD 12GA X 7" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 77 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-8000
- CUPHEAD 12GA X 8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 88 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH1112-8000-T
- CUPHEAD 12GA X 8" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 88 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH11121-1000
- CUPHEAD 12GA X 10" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1010 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH11121-1200
- CUPHEAD 12GA X 12" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1212 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH11121-1200-T
- CUPHEAD 12GA X 12" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1212 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH11121-1600
- CUPHEAD 12GA X 16" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1616 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH11121-1800
- CUPHEAD 12GA X 18" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1818 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH2012-0375
- CUPHEAD 12GA X 3/8"
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3/83/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-0500
- CUPHEAD 12GA X 1/2"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1/21/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-0625
- CUPHEAD 12GA X 5/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 5/85/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-0750
- CUPHEAD 12GA X 3/4"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3/43/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-0875
- CUPHEAD 12GA X 7/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 7/87/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1000
- CUPHEAD 12GA X 1"
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 11 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1125
- CUPHEAD 12GA X 1 1/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/81 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1250
- CUPHEAD 12GA X 1 1/4"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/41 1/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1375
- CUPHEAD 12GA X 1 3/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 3/81 3/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1500
- CUPHEAD 12GA X 1 1/2"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 1/21 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1625
- CUPHEAD 12GA X 1 5/8"
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 5/81 5/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1750
- CUPHEAD 12GA X 1 3/4"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 3/41 3/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-1875
- CUPHEAD 12GA X 1 7/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1 7/81 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-2000
- CUPHEAD 12GA X 2"
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 22 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-2125
- CUPHEAD 12GA X 2 1/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/82 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-2250
- CUPHEAD 12GA X 2 1/4"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/42 1/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-2500
- CUPHEAD 12GA X 2 1/2"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 2 1/22 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-3000
- CUPHEAD 12GA X 3"
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 33 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-3125
- CUPHEAD 12GA X 3 1/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 1/83 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-3500
- CUPHEAD 12GA X 3 1/2"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 1/23 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-3875
- CUPHEAD 12GA X 3-7/8" W/PAPER WASHER
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 3 7/83 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | PAPERPAPER |
- Log in for price
- CH2012-4000
- CUPHEAD 12GA X 4"
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 44 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-4125
- CUPHEAD 12GA X 4 1/8"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 4 1/84 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-4500
- CUPHEAD 12GA X 4 1/2"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 4 1/24 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-5000
- CUPHEAD 12GA X 5"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 55 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-5500
- CUPHEAD 12GA X 5 1/2"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 5 1/25 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-6000
- CUPHEAD 12GA X 6"
- B
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 66 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-7000
- CUPHEAD 12GA X 7"
- C
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 77 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-8000
- CUPHEAD 12GA X 8"
- D
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 88 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH2012-8750
- CUPHEAD 12GA X 8 3/4"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 8 3/48 3/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH20121-10000
- CUPHEAD 12GA X 10"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1010 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH20121-12000
- CUPHEAD 12GA X 12"
- G
- 0
| Pin Diameter: | 12 GAUGE12 GAUGE |
| Length: | 1212 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-0500
- CUPHEAD 14GA X 1/2"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 1/21/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-0625
- CUPHEAD 14GA X 5/8"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 5/85/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-0750
- CUPHEAD 14GA X 3/4"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 3/43/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-0875
- CUPHEAD 14GA X 7/8"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 7/87/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-1000
- CUPHEAD 14GA X 1"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 11 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-1375
- CUPHEAD 14GA X 1-3/8"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 1 3/81 3/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-1500
- CUPHEAD 14GA X 1-1/2"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 1 1/21 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-1875
- CUPHEAD 14GA X 1-7/8"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 1 7/81 7/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-2000
- CUPHEAD 14GA X 2"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 22 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-3000
- CUPHEAD 14GA X 3"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 33 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-4000
- CUPHEAD 14GA X 4"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 44 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3014-5000
- CUPHEAD 14GA X 5"
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 55 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | NONENONE |
- Log in for price
- CH3114-0500
- CUPHEAD 14GA X 1/2" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 1/21/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH3114-0625
- CUPHEAD 14GA X 5/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 5/85/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH3114-0750
- CUPHEAD 14GA X 3/4" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 3/43/4 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH3114-0875
- CUPHEAD 14GA X 7/8" W/TAPE WASHER
- C
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 7/87/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH3114-1000
- CUPHEAD 14GA X 1" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 11 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH3114-1125
- CUPHEAD 14GA X 1-1/8" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 1 1/81 1/8 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH3114-1500
- CUPHEAD 14GA X 2-1/2" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 2 1/22 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
- CH3114-2500
- CUPHEAD 14GA X 2-1/2" W/TAPE WASHER
- G
- 0
| Pin Diameter: | 14 GAUGE14 GAUGE |
| Length: | 2 1/22 1/2 |
| Material: | MILD STEELMILD STEEL |
| Insulator: | TAPETAPE |
- Log in for price
No items match your selected filters. Please change or reset your filters to try again.
Page {pageNumber} of {pagesNumber}
Loading
Item Added to Cart
View Cart
View Cart
Wishlist Updated
View Wishlists
View Wishlists
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our cookies and terms of use policy.